Note: If buyers' bike rear wheel is with quick release,we suggest buyers do not buy the gas frame unless buyers are professional. New GT-A with disc brake mounting ports ready on the rear end of the frame; Brake system: Disc brake Gas motor with 8mm front mount bolts fits on well on the Pedestal mt of CDH gas frame! Package Include: 1pc 2.4L Gas Frame(Black), 1pc Petcock 10*1mm, 1pc Non-suspension Fork(Black), 1pc Headset, 1pc YD100 Engine Kit, 1pc Black Front Motor Mount Requirement on seatpost:27.2mm Required for seat post clamp:31.8mm Head tube: 150mm; Requirement on headset size: 1 1/8"; Requirement on petcock size: 10*1.0mm Bottom bracket 2" diameter; Rear Width: 135mm 38mm diameter downtube 70 degrees angle V frame. The width and Inner Diameter (including depth of screw) of the bottom bracket : 68mmx51.5mm/2.677inx2in
Note: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame;
CDHPOWER Reinforced Black bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacing
Rear Disc brake bracket and front mount pedestal works well with 8mm gas motor front mount bolts
Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.
PLEASE NOTE 1: the best safe speed if racing: 35km/h; 2 Stroke YD100 Engine Kit: Gasoline motor: YD100-CDH100CC(Real Displacement is 79cc/80CC) Engine Type: Single cylinder, air-cooled,2-stroke Mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km Power: 2.0KW Bore and Stroke: 50mm x 40mm Cylinder inner diameter: 50mm Piston outside diameter: 50mm Maximum speed:45-50km/h 8mm front and rear mount studs NEW Red CDI IGNITION Cylinder Head and Cylinder Two In One , better design for cooling, higher power with hill driving easily. 26" Non-suspension Fork Information: Triple three non suspension fork with double BLACK shoulder for motorized bike Overall length:700mm;Inside length Max between the two Alum plates:188.5mm Fork is compatible with cdhpower gas tank frames. Required Headset size:1 1/8" , 1 1/8" headset for 44mm Head Tube and 28.6mm Fork PLEASE NOTE: The best safe speed if racing: 35km/h; Disc brake bracket and V brake bracket;
Fit well on Handle bar bicycle handle bar,
TRIPLE TREE NON SUSPENSION FORK IS COMPATIBLE WITH CDHpower GAS TANK FRAMES.
26" front fork: non suspension with double shoulder;
Compatible with 26"*3 tire max;
Center hole to center hole: 50mm
Rear Disc brake bracket. Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes. Rear Disc brake bracket and front mount pedestal works well with 8mm gas motor front mount bolts . Bottom bracket 2" diameter. 0.5mm thickness front mount pedestal. CDHpower Reinforced front mount pedestal. 38mm diameter downtube 70 degrees angle V frame. Head tube: 150mm. Requirement on headset size:1 1/8" Sample of gas bike w/2.4L gas frame. This is how it looks like when you finish building the complete bike. Item Weight : 10.15 pounds
Returns Accepted for this item if it's within 30 Days